Pneumatic Nailers & Staplers

Pneumatic 2 inch Floor Cleat NailerPneumatic Floor Cleat Nailer
Model:  H7826
Grizzly Industrial Brand
Nail Length:  1″ to 2″
Magazine Capacity:  100 Nails
Operating Pressure:  60-100 psi
Hardwood Flooring Nailer
Click here for Owner Manual
 Click here for Air Compressors
Click here for guide to “Figure Hardwood Flooring Nails”
Using 2-1/4″ Boards, it’s about 8 nails per sq/ft at 8″ spacing approxiamately.

 

Bostitch Coil Roofing NailerPneumatic Bostitch Coil Roofing Nailer
Model:  RN46-1
Fastener Gauge:  15 Gauge
Fastener Range:  3/4″ to 1-3/4″
Magazine Capacity:  120 Nails
Operating Pressure:  70-120 psi
Thread Fitting Type:  1/4″ NPT
Magazine Capacity:  120 Nails
Operating Pressure:  70 – 120 psi
Applications:  Composition roofing, Exterior drywall, Vapor barrier installation, Insulation board, Fiber cement siding.
Click here for Operators Manual
 Click here for Air Compressors

 

Pneumatic Bostitch 3.5 inch Framing NailerPneumatic Bostitch Framing Nailer
Model:  F28WW
Fastener Length:  2″ to 3-1/2″
Fastener Shank Diameter:  .113-.131
Collation Type:  Wire Weld 28 degree
Magazine Capacity:  100 Nails
Operating Pressure:  80 – 120 PSI
Applications:  Framing, Sheathing, Siding, Trusses, Bridging, Wood to masonry, Engineered lumber, Fencing, Exterior decks.
Click here for Operators Manual
Click here for Air Compressors

 

Pneumatic Bostitch 15ga. 2.5 inch Angled Finish NailerPneumatic Bostitch Angled Finish Nailer
Model:  N62FN-2
Fastener Range:  1″ to 2-1/2″
Fastener Gauge:  15 Gauge (25 Deg.)
Fastener Type:  FN15 Series Nails
Magazine Capacity:  100 Finish Nails
Driving Power:  400 in-lbs @ 100 psi
Applications:  Decorative trim, Finish wood panels, Drawers, Cabinets.
Click here for Air Compressors

Pneumatic Porter Cable 18ga. 1.25 inch Brad NailerPneumatic Porter Cable Brad Nailer
Model:  BN 125
Fastener Gauge:  18 Gauge
Fastener Length:  5/8″ to 1-1/4″
Operating Pressure:  70-120 psi
Click here for Air Compressors

 

 

Pneumatic Bostitch 18ga. 1.5 inch Finish StaplerPneumatic Bostitch Finish Stapler
Model:  SX1838
Fastener Range:  1/2″ to 1-1/2″
Fastener Gauge:  18 Gauge
Fastener Type:  SX5035 Series 7/32″ Crown
Operating Pressure:  70 – 120 psi
Magazine Capacity:  100
Click here for Air Compressors

Pneumatic Bostitch 18ga. 1.5 inch Cap StaplerPneumatic Bostitch Cap Stapler
Model:  SB150SLBC-1
Fastener Range:  3/4″ to 1-1/2″
Fastener Gauge:  18 Gauge
Use Bostitch SL5035 Series Staples
Magazine Capacity:  163 Staples & 100 Caps
Operating Pressure:  80 – 100 psi
Thread Fitting Type:  1/4″ NPT
Applications:  Securely fastens most construction fabrics to foam insulation to sheathing, Felt paper installation, Housewrap installation.
Click here for Air Compressors

Recent Posts